How to fix Fixing C Stage 2

When you power on your PC and see a black screen with the Windows or OEM logo and an error message occur – ‘Fixing C Stage 2 issue,’ you will need to resolve it with the help of special tips and methods. And if you are searching for those tips, then you don’t need to look any further as we have got you covered.

From this tutorial, learn how to stop Fixing (C Stage 2) errors and also understand what the reasons are behind this error happening in the first place.

What is the ‘Fixing C Stage 2 issue?’

If you are seeing the Fixing C Stage 2 problem on your Windows screen, it would need to be resolved; otherwise, it will keep on happening.

This error pops up when the Disk Error Checking detects hard drive issues. This kind of error is usually seen on older hard drives.

There can be a maximum of four stages when Windows tries to automatically rectify the error. ‘Fixing C Stage 2 begins after Stage 1 and usually is shorter than the former.

What causes the ‘Fixing C Stage 2 issue?’

Several reasons can give rise to the Fixing C Stage 2 issue and they are;

  1. Frequent Power failure issues
  2. Corruption in the hard drive
  3. The shutdown was not proper the previous time
  4. The hard drive is damaged and destroyed
  5. A lot of junk files and a heavy load on the hard drive
  6. Your system has a virus
  7. Incorrect driver configuration

In the below section we will share the various ways in which this issue can be rectified.

Method 1: Advanced process

Altering the registry is possible in the way given here. Here’s how you can use an advanced means to Fix C Stage 2 issue.

1. Open the Run window by clicking on the Windows and R keys.

2. Type ‘Regedit’ and then press on the ‘OK’ tab.

How to fix Fixing C Stage 2

3. Once you can spot the Registry Editor window, you need to copy the following command and paste it into the space before pressing the Enter tab.

 ‘Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager’

How to fix Fixing C Stage 2

4. Search for the Boot Execute option and double click on it and then check for the Edit Multi-String interface. Set your value data and check on the Auto Check option. Ideally, alter the “auto-check autochk /k: C *.” 

5. Press the ‘OK’ tab to complete the action.

6. Once done reboot your PC and when it starts next time you shouldn’t be encountering this error.

If you use the advanced technique, you will better benefit as it will resolve your issue permanently.

Method 2: Run Startup Repair 

It is very common to face errors while using your PC. To solve these issues Windows has an inbuilt tool named Startup Repair. If you are facing any error then you can fix it by running startup repair. 

Follow the given below steps to run Startup Repair: 

  • Firstly, shut down your PC by pressing the power button for few seconds. 
  • Then again press the power button to restart your system. 
  • When you see PC manufacture’s logo press and hold the power button for about ten seconds. 
  • After restarting your PC, click on Troubleshoot. 
  • Next, navigate to advanced option. 
  • After that, click on startup repair. 

Windows will take few seconds to complete the process. After following all the steps, Fixing C stage 2 error will be fixed. 

Method 3: Run an SFC Scan to Fix the error 

When you run SFC scan it will find all the corrupt and damaged files and also fix them. The corrupt or damaged files may be generated during installation.

Follow the given below steps to run the SFC scan:

  • Firstly, boot your PC by using Windows Installation Media or safe mode. 
  • After that, click the repair option.
  • Click on troubleshoot on the blue screen recovery window. 
  • Next, click on the advanced option. 
  • After that, click on Command Prompt. 
  • Now, enter the following command to run the SFC scan.

        Sfc / scannow

  • When the SFC scan is complete restart your system. 

Method 4: Run CHKDSK 

You can Run the CHKDSK command to stop fixing the C stage 2 error. Follow the given below steps to execute this method:

  • Press the Win key or click on the start icon to open the search bar.  
  • Type command prompt in the Windows search box. After that, click on Run as Administrator. 
  • When the Command Prompt Window appears, type the command chkdsk c:/r. 
  • If “chkdsk cannot run because the volume is in use by another process message appears, enter Y to say yes and press enter key. 
  • At last, restart your PC. This method will scan your PC for damaged and corrupted files and fix the issue. 

Method 5: Use Restoro to Resolve the Issue 

All the above methods are quite difficult and require some technical skills to execute. But many users lack skills and need a software which can automatically perform all the major tasks to fix the issue.

Restoro is one software which can automatically scan for missing and corrupted files and replace them with appropriate copies. Apart from this, it can also fix all the other common issues and boosts your system performance. 

It requires one or two clicks to repair your PC.  Follow the given below steps to stop the ‘Fixing C stage 2’ issue. 

  • Firstly, download and install Restoro on your PC. 
  • After installing it, scan your PC. 
  • At last, click on the start repair option given bottom of the page in green colour. 
  • Within a few seconds, it will fix the issues. 


Hereby, you can easily Fix C stage 2 issue if you follow these steps. If you are currently facing this issue, these resolutions should make your system up and running.


What does fixing C stage mean?

The fixing C stage refers to the situation when Windows encounters some kind of inconsistency in the drives. It can have a maximum of four stages.

How do I stop Windows 10 C Stage 2?

There are some excellent and handy tips given in the above section of this blog that can help you resolve the Fixing C stage 2 problem.

Why is my HP laptop fixing C?

Your HP laptop is fixing C because it is encountering and identifying some inconsistencies with the device drivers.

What does fixing drive mean?

Fixing or repairing a drive refers to the process of disk checking that is initiated and executed by Windows Automatic Repair whenever the Windows system fails to boot properly. Automatic Repair then performs a diagnosis, scan, and repair of the C, D, and other drives.

Also Read

  • Auslogics Disk Defrag Review
  • O&O Defrag Review
  • 10+ Best FREE GPU Benchmark Software
  • 10 Best Image Converter Software
  • Defraggler Review

What does fixing C stage mean?

17 (2021–present) Oct 3. If you see a black screen with a Windows logo and a message saying “Fixing (C:) Stage 1” when you boot the Windows PC, it means your system is checking for disk error. It will detect hard drive issues and fix them during the process, which usually takes a long time to finish.

How many stages are there in fixing C drive?

Usually, there are four stages of fixing drives.

Why is my computer repairing the C drive?

You will typically get the “Scanning and repairing drive” message when your computer hasn't been properly switched off: due to a forced shutdown, a power failure, etc.